Article about sprayer nozzles

Twin flat spraying nozzle: suitable for sprayers with high advance speed, due to the spraying angle of 30 and 50 degrees from the front and back, it sprays the poison to the product from both the front and the back, the same spray width on the product, no air mixing (bubbles) with Liquid, for products with long pressure, suitable for cooling 1/5 bur -> 1 lit/min – 8 bur -> 1/3 lit/min 2. Symmetrical flat spray direction: 40 and 40 degrees from the front and back, suitable for spraying in bad weather, working pressure 8 to 1/5 bur -> 1/3 lit/min - 1/5 bur -> 0/56 lit /min 8 3. Smooth spraying nozzle: Due to high working pressure and high consumption, it achieves the best performance in very unfavorable weather. Air and pressure fluid mixer (bubble) 8 to 3 bur 2 to 3 cm products 3bur -> 3lit/min – 8bur -> 8lit/min 4. Smooth spray nozzle: large droplet size, suitable for newly germinated products and herbicides, suitable penetration, pressure range up to 3 times, spray width 25cm, cool places 1/5bur -> 1lit/min – 3bur -> 6lit/min 5. Flat spray nozzle towards the back: suitable for ungreened products and herbicides, high working efficiency, suitable for adverse weather conditions, pressure 8 bur to 1/5 bur -> 1/55 lit/min – 8 bur -> 3 lit/min 1/5 6. Flat nozzle resistant to clogging: suitable for spraying water (poison) containing toxic powders, backward spraying and round spray section, working pressure 3 to 1 bur, low consumption 1 bur -> 0.3 lit/min - 3 bur -> 0.39 lit/min min 7. Standard twin flat spray nozzle: with the smallest droplets, vertical spray 30 degrees front and back, steel material, lifetime pressure, bur 3 to 2 bur -> 0.65 lit/min 3 bur -> 0.8 lit/min 2 8. Universal flat spray nozzle: suitable for most sprayers, with high quality, fine droplets, plastic body and ceramic nozzle, lower working pressure than all nozzles, working pressure 2.5 bur to 1.5 bur -> 0.28 lit/ min 1/5