History of Rotivator

Erichche Rotivator: Differences between rotivator and cultivator: Cultivator device in agricultural land including 1. Weeding and stirring the soil 2. Mixing compost 3. Weed control and rotivator device in agricultural land including: 1. Deep plowing 2. Loosening heavy soils 3. Breaking hard layers below. The types of rotivators are as follows: 1. Fixed rotivar2. Hydraulic sliding rotivator 3. Manual sliding rotivator 4. Sensor rotivator 5. Two-sided folding rotivator 6. Roller rotochisel 1. Fixed rotivator: one of the important features of this device is not to throw mud towards the tractor operator, fixed rotivator can be installed on all kinds of tractors according to the working width and the number of blades. Fixed rotivators can only be used in one work path it is used fixed and the possibility of using it in an offset form, which is not available in the case of the sliding rotivator, the power of the device is provided through the power axis of the tractor of the same p.t.o. 2. Hydraulic sliding rotivators: potted rotivators are very suitable for vineyards, gardens and paddy fields. Please note that this type of rotivators are sliding, that is, it can be easily used in an offset way and for tillage between trees. Pay attention to the type Its hydraulics, with the hydraulic jacks installed on the device, the rotivator can be guided between the trees, and when it reaches the obstacle, the rotivator can be returned to its original location by means of special levers and jacks of the device, this saves It saves time and costs and increases the speed and quality of work. 3. Manual sliding rotator: The function of this device is similar to the hydraulic type, with the difference that the movement of the rotator is done by a manual lever and mechanically. This device can be offset from the side of the tractor to the under trees when the tractor is moving. Plow the river and its soil. This operation is done manually. 4. Sensor rotator: It means that in plowing operation, when it hits an obstacle or a tree, it turns back and ignores the obstacle or tree. The rotator with sensors is installed on the back of the tractor and performs tillage operations. This device is used in gardens and fields where plowing is done in rows. 5. Two-way folding rotiator: Folding rotiators are used in fields and large fields to crush clods in secondary tillage. 6. Rotochisel with rollers: Rotochisel is used to break down and crush lumps and pound and smooth the soil. Rotivator blade description: The blades are installed on the device in such a way that only one blade hits the ground during operation. The blades are placed in the shape of C, left and right, and one in the middle. If the fertilizer is on the soil, it is mixed with the soil below. The number of blades depends on the power of the tractor and the dimensions of the land. The shape of tractor blades are: L-shaped blades, C-shaped blades, Golden blades, Fiat blades How the Rotivator works: The Rotivator cuts, crushes and mixes the soil at a certain depth (usually 15 to 30 cm), which causes the weed stems to mix with the soil, which both maintains soil moisture and for The sowing is prepared, the rotivators are equipped with an adjustable back door of the buffer, which can control the intensity of the soil crushing, finally, when the rotivator passes through the soil surface, no lumps or ridges remain, and the soil surface becomes smooth and suitable for agriculture. . Necessary measures before preparing rotivator: 1. Before using the Rotivator tool, check the soil moisture. Measuring moisture is very important, especially in cases where the soil is compacted or has not been plowed yet; Because the behavior of the rotivator changes according to the type of soil and humidity and dryness. 2. Remove weeds first before plowing, as these may get caught in the rotivator blade and spread around. 3. Place the rotivator on a flat surface and check the oil level of the gearbox and gear box. If needed, fill with oil and grease. 4. It is necessary to ensure the correct connection of three points on the tractor. 5. Connecting the clutch gearbox to the power axis of the tractor 6. The spring bolts of the clutch pad should be adjusted according to the hardness of the soil; The collage will not work properly if it is not set. 7. To start the work, first the rotivator engine and the tractor are coupled and tested for a while at a speed of 540 rpm. 8. Fill the machine's grease nipples with grease before doing the work. 9. To start working with the rotator, the device must be level in width and length. 10. Check the tightness of ski bolts and blades bolts