Description

Double Side Folding Rotavators

(Suitable for heavy & semi-heavy tractors 110 to 150 hp)

Machine Application

This machine is used in large farms and lands to crush clods instead of discs in primary and secondary tillage.

Advantages of the Device

1. For the effectiveness of the device working width, the number of blades is embedded in 6 plates.

2. Due to its high plowing depth, it is a good alternative to discs.

3. Equipped with 12 mm plates to prevent premature erosion of the blades.

4. Equipped with a gear transmission mechanism on both sides of the device.

5. Equipped with Vascazen middle hubs, eliminating lubrication operations.

6. Equipped with two side gearboxes to increase power in rotavators over 3 meters.

7. In case of order, the possibility of mounting high-depth tillage blades along the tractor tires.

8. For easy transportation, the device can be folded hydraulically.

9. Equipped with traffic lights and reflectors when the device is folding or in use.

10. The device is equipped with three integrated points.

11. Equipped with gearboxes on both sides and a three-way gearbox with two speeds in rotavators over 3 meters.

12. Designed with high-quality materials such as ST52 sheet and special steel parts.

13. Using double-row ball bearings on all four sides of the machine for flexibility against flange impacts.

14. Equipped with two cardan shafts with clutch system on both sides to transfer power from the gearbox to the side gears.

15. Equipped with a spring-loaded rear door to level the ground (trowel). In heavy rotavators, the rear door system is hydraulic.

16. Equipped with a safety pin to prevent shocking blows to the device on both sides.

17. Equipped with hydraulic lock after folding.

18. Equipped with an integrated axle shaft, 120 mm in diameter, made of high-alloy steel.

19. In case of order, it is possible to install a disc in front of the device for soil leveling.

20. Equipped with 35 mm wide gears to increase device strength.

21. Equipped with a leveling system for easy adjustment of the arms and balancing the device in place.

22. Unique flange design with blades 5 cm apart to prevent any tillage vacuum.

­Specification table